Reason Why kodak Printer Not Printing Black with New Cartridge?

 

Kodak Printer is well-known for providing incredible printing quality and also offers fantastic printing quality to consumers. But Kodak Printer is not only meant for printing purposes as it also helps with copying and scanning tasks. Kodak printer users sometimes encounter the issue of why Kodak printer not printing black with new cartridge, and there are several reasons for the problem.

Here you will know the most common factors for the issue. Get a brief idea to understand and resolve the solution of Kodak hero printer not printing black issue. 

Reasons for Kodak Printer Not Printing Black Ink!!

Let’s check out the probable factors for the issue behind the Kodak printer not printing black ink. Some of the most common reasons are:

1.      Outdated printer driver.

2.      Dirty cartridge

3.      Malfunction in cartridge tapes

4.      An issue in printing calibration

Now that you very well know about the reasons for the issue let’s dig into the solutions for why is my KodakPrinter not printing black!!

Solutions to Resolve Issue of Kodak Printer Not Printing Black!!

Let’s understood the solutions to resolve the issue of Kodak Printer not printing black properly. 

Basic Troubleshooting to Start

1.      Start by turning off the Kodak printer, unplug the power source, and then disconnect the USB cable along with it. After few moments, reconnect the printer and then plug it back in. Turn on your printer back on.

2.      Get a print of the print test page or quality diagnostic report.

3.      You can easily find the option for a printer display screen or even check the printer user manual to get step-by-step instructions.

4.      To double-check the ink volume, check the printer level in the cartridge. If you are using an aftermarket cartridge that doesn’t show ink level, then figure out the way to determine whether the ink cartridge is at fault or not.

Update Your Printer Driver

Outdated drivers might be responsible for resisting the Kodak printer not printing black with a new cartridge. For this, you need to update the printer driver to the latest version. There are three ways available through which you can easily update the Kodak Printer driver and resolve the issue of the Kodak ESP 3250 printer not printing black. 

Firstly, download the setup files from the Kodak support page and then install them one by one. After that, update the operating system to download the latest driver. In the third step, update the driver through a control panel, and it will eventually fix the issue of the printer, not printing black.

The next method includes opening the control panel and tap on the category view. With this, you can choose the system and security option.

After opening the system and security window, you can see the list of installed drivers. Right-click on each one of them and then update the drivers. When you updated the drivers successfully, reboot the printer and PC and then try to print a test page. It will help to check whether the entire operation is successful or not. 

Check Ink Cartridge 

1.      Start by replacing the ink cartridge if it’s low or empty.

2.      Ensure that the ink cartridge is snapped into place and is also installed in the proper slot.

3.      Double-check to ensure that you have removed the tape over the vent while installing the new cartridge.

4.      Along with it, check whether the cartridge vents are clogged or not. If it is clogged, you can fix it by gently using the pin to clean up the clog on the vent.

5.      You can also use the ink cartridge to determine whether the printer is able to recognize the cartridge. If the printer is working with the old cartridge, then try installing the old cartridge again and then see if the printer is the product; any output like any shade of grey will work.

Here, you just have to determine whether the printhead or cartridge is causing the issue of the KodakESP 5210 printer not printing black. If the printer is properly working with the old cartridge, then the issue is not in the printhead. The probable chances are that the new black cartridge is at fault and needs to be replaced. 

Conclusion 

 I hope you get all the information about the causes for Kodak all in one printer, black ink not printing. Check out the guide properly and get to know about the solutions to fix the issue.

Related Stories

How to Setup and install Kodak

How to Resolve Kodak Printhead Errors

Kodak Easy Share Printer Dock Series 3

How do I Setup my Kodak Wireless Printer

Kodak Wireless Printer not connecting to Windows PC